Fuel Additives



We, U.S.STERILES are engaged in manufacturing “Fuel Additives” chemical with Green Burnt Technology. It is a concentrated combustion improver for heavy fuel oils. It has also fuel-conditioning properties. The catalyst in product reacts with heavy fuel oil particle during combustion. The fuel ignition temperature is reduced, resulting in increased combustion efficiency with less carbon left to form smoke and soot. Engine and exhaust system are kept cleaner with longer service life and less maintenance.
Anti polymerization agents inhibits sludge formation, while dispersants stabilize the fuel. This results in cleaner fuel system and better fuel flow, giving improved fuel automisation and greater combustion efficiency. The conversion of fuel sulphur to potentially corrosive sulphur tri oxide gas is also inhibited.

Key Features and Benefits:-

  • Improves Combustion.
  • Reduces Carbon/Ash Deposit.
  • Overall improvement of fuel combustion and economy.
  • Limits soot formation and smoke emission.
  • Cold end corrosion is reduced.
  • Extended service life of engine components.
  • Very effective with low dosing

Application and Dosage:-
Chemtol: It is completely oil soluble. It can be added directly to the setting tank or better still, it should be dosed automatically using a metering pump to dose into the fuel feed lines as near to the injector. Where fuel analysis for Micro Carbon Residue [MCR] is available, dose according to the table below:

Mcr % 10 12 14 46 18
Dosage 1:4000 1:3000 1:2500 1:2000 1:1000

Please consult our technical executive for exact dosage.

General Specification:

Details Chemtol – 31 Chemtol – 32 Chemtol – 33
For Furnace Oil For LDO For Diesel /
CAS Registry Not Applicable For Not Applicable For Not Applicable For
Number Mixtures Mixtures Mixtures
Product Type Fuel Oil Additives- Fuel Oil Additives- Fuel Oil Additives-
Multipurpose Multipurpose Multipurpose
Appearance- Amber Liquid Amber Liquid Amber Liquid
Specific Gravity 0.92 – 0.94 0.92 – 0.94 0.92 – 0.94
@ 15.6°E .
Flash Point 170°C 120°C 90°C
Odour Mild Mild Mild
Freezing Point 4°C -5°C -16°C
Solubility In
Petroleum Product Completely Soluble Completely Soluble Completely Soluble
Water Insoluble Insoluble Insoluble
Toxicity Non -Toxic Non -Toxic Non -Toxic
Viscosity At 20°C,
170 140 110

Handling measures and precautions:-
Proper human safety products such as Safety goggles, lab coat, gloves and boots should be worn while handling and applying chemicals. Please refer MSDS for more details.

This product should be stored in cool and dry places, away from sources of heat, flame and direct sunlight for more shelf life. Please refer Label, Technical Data Sheet and MSDS for more details

Available in container of 30kg & 50 Kg.

Get a Quote